I Had To Switch My Home Router, Do I Have To Unregister And Register My Honeywell Wifi Thermostat?

The kitchen may be the heart of whatever home, just the thermostat is certainly what keeps everyone happy in that home. Whether you are upgrading to a smart home setup or just working with a new Ac or furnace, you can install a new thermometer with ease past post-obit a few steps. You do not demand to be a professional person maintenance worker to execute this DIY-friendly project.

Assemble Your Tools

When executing whatever DIY project, you ever desire to take your tools set up and waiting so that yous are not scrambling to observe something mid-project. To change your thermostat, you need:

A screwdriver gear up, or multi-fleck screwdriver Masking record A pen A digital camera or the camera on your phone Drywall anchors (as needed)

Once you lot have your tools, assemble them on an like shooting fish in a barrel-to-reach surface near your thermostat.

Turn Off the Ability Source

You lot should never begin any electrical work in your home until you have turned off the power sources involved. Go to the billow box in your home and flip off the breakers that supply the furnace and the air conditioning units. Brand sure that you test to ensure that the power is off, as well. Adjust the temperature on the old thermometer by more than x degrees in both directions and encounter if either unit turns on. If not, you are golden and can proceed.

Remove the Old Faceplate

The next step is to remove the faceplate from the erstwhile thermostat. Most faceplates only popular off. Yous can typically find a slot on the side of the unit or a latch that you can employ to remove the faceplate. You should now have access to the thermostat's wall plate and should meet the wiring and wall screws.

Label the Wires

This is maybe the most critical footstep in the thermostat installation process, just like shooting fish in a barrel to execute. First, use your camera to take a photo of the wall plate and wiring. You tin can use this equally reference if there is any defoliation downwardly the line. Your new thermostat may also provide wire labels. Apply either your wire labels or the masking record and pen to label each wire.

Remove the Wires and Old Thermostat

In one case you have labelled the wires, you tin remove the wires from the old thermostat. You may need a screwdriver to loosen screws holding the wires in identify. Some units may have clips property the wires in place. In those cases, all you need to do is open the clip and pull the wire out. Adjacent, employ your screwdriver to remove the screws property the wall plate onto the wall.

Install Drywall Anchors

If your new thermostat has the same layout as your old one, you tin can skip this pace. In some scenarios, the screws that agree your new wall plate in place may be in a different identify than on your old thermostat. If this is the case, install drywall anchors into your wall before screwing in the new wall plate. To do this, drill a hole the bore of the anchors, then hammer the anchor into the wall until it is flush with the wall. Spiral the new wall plate into the wall.

Wire in the New Thermostat

For your final step, you should install the wires into the new thermostat. Yous can reference your new user manual if there is whatsoever confusion, but your labelled wires should correspond neatly with ports on the new thermostat. Place the face plate onto the new thermostat, so restore power to the unit before testing it.